Glossary entry (derived from question below)
English term or phrase:
under press pulper
Czech translation:
rozvlákňovač pod (klížicím) lisem
Added to glossary by
Pavel Prudký
Jan 8, 2009 06:28
15 yrs ago
1 viewer *
English term
under press pulper
English to Czech
Tech/Engineering
Paper / Paper Manufacturing
Jedná se o název stroje, "pulper" je mi jasný - rozvlákňovač nebo rozvlákňovací stroj, spíš si nevím rady s výrazem "under press". Název nemám v žádném kontextu, pouze mohu poskytnout něco z popisu stroje, jestli to pomůže:
A ještě poznámka - celý anglický text je překlad z italtiny.
Its function is transform the dry rejects in a fibrous suspension at the right density for the following working.
The working principle is that rejects are conveyed into the vat through the upper chutes where the rejects are wetted by the spraying pipes.
Once arrived into the vat with the necessary quantity of water, rejects are put in agitation by the rotor which providing to the breaking of the fibers and homogenize the pulp.
When the pulp has obtained the right density it passes through the drilled plate that stop the rejects and allow at the fiber to pass into the conveyor and from here the pulp can be send at the following working.
The Under Press Pulper comprises:
• A tank, which makes up the body of the machine where dry pulp is carry out at the right work density it can be in concrete in this case not included in the supply.
• A rotor made by tro group of orientable blade mounted in a shaft.
• A drilled plate for the filtering of the pulp
• A Dump Conveyor where is obtained a connection for the pulp discharge
• A bearing support on which the shaft bearings and seal rings are fitted.
A ještě poznámka - celý anglický text je překlad z italtiny.
Its function is transform the dry rejects in a fibrous suspension at the right density for the following working.
The working principle is that rejects are conveyed into the vat through the upper chutes where the rejects are wetted by the spraying pipes.
Once arrived into the vat with the necessary quantity of water, rejects are put in agitation by the rotor which providing to the breaking of the fibers and homogenize the pulp.
When the pulp has obtained the right density it passes through the drilled plate that stop the rejects and allow at the fiber to pass into the conveyor and from here the pulp can be send at the following working.
The Under Press Pulper comprises:
• A tank, which makes up the body of the machine where dry pulp is carry out at the right work density it can be in concrete in this case not included in the supply.
• A rotor made by tro group of orientable blade mounted in a shaft.
• A drilled plate for the filtering of the pulp
• A Dump Conveyor where is obtained a connection for the pulp discharge
• A bearing support on which the shaft bearings and seal rings are fitted.
Proposed translations
(Czech)
3 +1 | rozvlákňovač pod (klížicím) lisem | Pavel Prudký |
References
souhlas s Pavlem | Alca Ryskova |
Change log
Jan 13, 2009 07:02: Pavel Prudký Created KOG entry
Proposed translations
+1
1 hr
Selected
rozvlákňovač pod (klížicím) lisem
moje dedukce, viz praktický příklad z Papcelu
--------------------------------------------------
Note added at 5 days (2009-01-13 07:01:59 GMT) Post-grading
--------------------------------------------------
rádo se stalo, také děkuji
--------------------------------------------------
Note added at 5 days (2009-01-13 07:01:59 GMT) Post-grading
--------------------------------------------------
rádo se stalo, také děkuji
Peer comment(s):
agree |
Alca Ryskova
: ten souhlas v referenci byl k původně ke Clarification request, poněvadž tato odpověď tu ještě nebyla, ale souhlas i s tímto
2 mins
|
děkuji
|
4 KudoZ points awarded for this answer.
Comment: "Díky."
Reference comments
1 hr
Reference:
souhlas s Pavlem
viz např. http://www.pita.co.uk/factsheets/public_view.php?id=76, zvláště část technical information
Discussion