Oct 24, 2015 13:21
8 yrs ago
English term
radius-end mill
English to Czech
Tech/Engineering
Mechanics / Mech Engineering
Obrábění
Překlad se týká CNC strojů.
kontext:
A near-singular posture in Cutting Point Command mode
If Rotation axes compensation and Smooth control is used in Cutting Point Command mode, Cutting
Point Command is performed on the tool posture compensated.
Generally, if the tool posture is a near-singular posture in Cutting point Command mode, the little
variations of the tool posture cause large movements of the tool position.
Therefore, in the case of using the square-end mill and the radius-end mill in a near-singular posture, the
excessive change of touch point between the work and the tool may be caused because of Rotation axes
compensation and Smooth control.
Mohla by to být zaoblovací čelní fréza?
V překladu již bylo použit překlad "" - zaoblená čelní fréza (nebo snad fréza s kulovým čelem?)
Předem děkuji.
kontext:
A near-singular posture in Cutting Point Command mode
If Rotation axes compensation and Smooth control is used in Cutting Point Command mode, Cutting
Point Command is performed on the tool posture compensated.
Generally, if the tool posture is a near-singular posture in Cutting point Command mode, the little
variations of the tool posture cause large movements of the tool position.
Therefore, in the case of using the square-end mill and the radius-end mill in a near-singular posture, the
excessive change of touch point between the work and the tool may be caused because of Rotation axes
compensation and Smooth control.
Mohla by to být zaoblovací čelní fréza?
V překladu již bylo použit překlad "" - zaoblená čelní fréza (nebo snad fréza s kulovým čelem?)
Předem děkuji.
Proposed translations
(Czech)
3 +1 | fréza rádiusová | jankaisler |
Proposed translations
+1
2 hrs
fréza rádiusová
Declined
"Formulář pro vytvoření cenové nabídky, neslouží pro závaznou objednávku.
Fréza válcová
Fréza rádiusová
Fréza kulová
Fréza kuželová"
Fréza válcová
Fréza rádiusová
Fréza kulová
Fréza kuželová"
Reference:
Discussion