Oct 24, 2015 13:20
8 yrs ago
English term
square-end mill
English to Czech
Tech/Engineering
Mechanics / Mech Engineering
Obrábění
Překlad se týká CNC strojů.
kontext:
A near-singular posture in Cutting Point Command mode
If Rotation axes compensation and Smooth control is used in Cutting Point Command mode, Cutting
Point Command is performed on the tool posture compensated.
Generally, if the tool posture is a near-singular posture in Cutting point Command mode, the little
variations of the tool posture cause large movements of the tool position.
Therefore, in the case of using the square-end mill and the radius-end mill in a near-singular posture, the
excessive change of touch point between the work and the tool may be caused because of Rotation axes
compensation and Smooth control.
Mohla by to být pravoúhlá čelní fréza?
V překladu již bylo použit překlad "" - zaoblená čelní fréza (nebo snad fréza s kulovým čelem?)
Předem děkuji.
kontext:
A near-singular posture in Cutting Point Command mode
If Rotation axes compensation and Smooth control is used in Cutting Point Command mode, Cutting
Point Command is performed on the tool posture compensated.
Generally, if the tool posture is a near-singular posture in Cutting point Command mode, the little
variations of the tool posture cause large movements of the tool position.
Therefore, in the case of using the square-end mill and the radius-end mill in a near-singular posture, the
excessive change of touch point between the work and the tool may be caused because of Rotation axes
compensation and Smooth control.
Mohla by to být pravoúhlá čelní fréza?
V překladu již bylo použit překlad "" - zaoblená čelní fréza (nebo snad fréza s kulovým čelem?)
Předem děkuji.
Proposed translations
(Czech)
3 | fréza válcová | jankaisler |
Proposed translations
2 hrs
fréza válcová
Declined
fréza válcová - pro vytváření pravoúhlých drážek, osazení
--------------------------------------------------
Note added at 3 hrs (2015-10-24 16:51:44 GMT)
--------------------------------------------------
stěny drážky svírají pravý úhel a vnitřní hrana je ostrá
--------------------------------------------------
Note added at 1 day2 hrs (2015-10-25 16:13:56 GMT)
--------------------------------------------------
stěny drážky se dnem ...
--------------------------------------------------
Note added at 3 hrs (2015-10-24 16:51:44 GMT)
--------------------------------------------------
stěny drážky svírají pravý úhel a vnitřní hrana je ostrá
--------------------------------------------------
Note added at 1 day2 hrs (2015-10-25 16:13:56 GMT)
--------------------------------------------------
stěny drážky se dnem ...
Reference:
Discussion