Glossary entry (derived from question below)
English term or phrase:
orifice bore
Polish translation:
otwór zwężki (pomiarowej)
Added to glossary by
Jahny
Sep 28, 2013 09:14
10 yrs ago
8 viewers *
English term
orifice bore
English to Polish
Tech/Engineering
Engineering (general)
Orifice Installation Instructions
Plate Installation:
Always handle orifice plates with care.
A bend or damage to the internal bore or upstream face can create measurement errors.
Orifice plates have data stamped on the handle for easy identification.
The orifice plate is to be installed and secured in place between two flanges.
Flange gaskets are to be used.
The plate outside diameter is sized to fit within the flanges bolt circle with all bolts installed.Care must be taken during installation so that the orifice bore is centered and as concentric as possible with the pipe centerline.
Plate Installation:
Always handle orifice plates with care.
A bend or damage to the internal bore or upstream face can create measurement errors.
Orifice plates have data stamped on the handle for easy identification.
The orifice plate is to be installed and secured in place between two flanges.
Flange gaskets are to be used.
The plate outside diameter is sized to fit within the flanges bolt circle with all bolts installed.Care must be taken during installation so that the orifice bore is centered and as concentric as possible with the pipe centerline.
Proposed translations
(Polish)
3 +1 | otwór zwężki (pomiarowej) | Katarzyna Müller |
Proposed translations
+1
25 mins
Selected
otwór zwężki (pomiarowej)
.
--------------------------------------------------
Note added at 30 mins (2013-09-28 09:45:17 GMT)
--------------------------------------------------
PDF z laboratoriów z informacjami technicznymi na temat pomiaru strumienia przepływu. Myślę, że można użyć "miejsce zwężenia przekroju przepływowego" w cely uzyskania brzmienia bardziej technicznego.
http://www.itcmp.pwr.wroc.pl/~znmp/dydaktyka/wzzmp/cw_4_POMI...
--------------------------------------------------
Note added at 30 mins (2013-09-28 09:45:17 GMT)
--------------------------------------------------
PDF z laboratoriów z informacjami technicznymi na temat pomiaru strumienia przepływu. Myślę, że można użyć "miejsce zwężenia przekroju przepływowego" w cely uzyskania brzmienia bardziej technicznego.
http://www.itcmp.pwr.wroc.pl/~znmp/dydaktyka/wzzmp/cw_4_POMI...
Reference:
4 KudoZ points awarded for this answer.
Something went wrong...