Glossary entry (derived from question below)
Hungarian term or phrase:
benyúlási mélység
English translation:
insertion depth/length
Added to glossary by
Sandor HEGYI
May 19, 2009 10:49
15 yrs ago
Hungarian term
benyúlási mélység
Hungarian to English
Tech/Engineering
Construction / Civil Engineering
vízelvezető rendszer
Háttérszöveg:
Az alábbi táblázat segítségével meghatározható a csővégek benyúlási mélysége (K) [mm] a hosszútokba, különböző szerelési hőmérsékleteken.
A válaszokat előre is köszönöm!
Az alábbi táblázat segítségével meghatározható a csővégek benyúlási mélysége (K) [mm] a hosszútokba, különböző szerelési hőmérsékleteken.
A válaszokat előre is köszönöm!
Proposed translations
(English)
4 | insertion depth/length | juvera |
4 | penetration depth | Katalin Szilárd |
Proposed translations
9 hrs
Selected
insertion depth/length
Ez egy alternatíva, mely az egymásba illesztett csöveknél gyakran használatos.
Insertion depth of the pipe in the coupling shall be controlled by gauge mark or mechanical stop in the coupling which will allow for a thermal expansion and contraction.
kanab.utah.gov/artman/publish/ordinance/article_32.shtml
An insufficient insertion depth should the pipe contract can result in the withdrawing of the pipe or an excessive misalignment; on the other hand, excessively deep insertions prevent the pipe from expanding freely and results in the creation of tensions that would damage the pipework.
www.valsir.it/eng/news.php?ID_NEWS=0200&RED=
Az ilyen illesztéseket slip jointnak hívják.
Insertion depth of the pipe in the coupling shall be controlled by gauge mark or mechanical stop in the coupling which will allow for a thermal expansion and contraction.
kanab.utah.gov/artman/publish/ordinance/article_32.shtml
An insufficient insertion depth should the pipe contract can result in the withdrawing of the pipe or an excessive misalignment; on the other hand, excessively deep insertions prevent the pipe from expanding freely and results in the creation of tensions that would damage the pipework.
www.valsir.it/eng/news.php?ID_NEWS=0200&RED=
Az ilyen illesztéseket slip jointnak hívják.
4 KudoZ points awarded for this answer.
Comment: "Köszönöm."
13 mins
penetration depth
http://www.marking-machine.com/some-achievements.html
"Stop ring for penetration depth. Automatic in retake marking machine of rings for position finding or penetration depth of a piece..."
http://www.freepatentsonline.com/4445714.html
"Whereas dimension Y can be varied to suit, a penetration depth of about ten percent of the wall thickness of pipe 22 has been found adquate. Typically, pipe 22 would have a Rockwell M hardness of about 50 as compared to the 80 M hardness of teeth 38. Should any pullout forces be subsequently encountered, the radial hoop stress of the gripper ring is totally contained by the locking ring thereby relieving transmittal of stress against the body."
Something went wrong...